Cold shower this morning? Puddle under the tank? Call us. Pro Service Mechanical repairs gas, electric and tankless water heaters across Saskatoon, Warman and Martensville, any hour of the day. We'll tell you what's wrong and what it'll cost before we start the repair.
| Â | Â |
|---|---|
| We Fix | Gas, electric and tankless water heaters, including John Wood and Bradford White |
| When | Same-day service when you call before 5 PM. Emergency service available 24/7. |
| Diagnostic Visit | $168 plus tax. We diagnose the problem and provide pricing before repairs begin. |
| Typical Repair | Most repairs run $168–$800. |
| Where | Saskatoon, Warman, Martensville and surrounding areas |
Most water heater problems come down to a worn component, sediment buildup or a problem with the tank itself. Here’s what we commonly see and what may be needed to fix it.
| What You’re Noticing | What’s Probably Going On | The Usual Fix |
|---|---|---|
| No hot water at all | Electric: failed heating element or thermostat. Gas: pilot, thermocouple or gas valve issues. | Test and replace the faulty component. |
| Hot water runs out halfway through a shower | Sediment buildup, a failed lower heating element or a damaged dip tube. | Flush the tank or replace the faulty part. |
| Water on the floor | Loose fittings, leaking valves or tank corrosion. | Repair the connection or valve. A corroded tank usually needs replacement. |
| Popping or rumbling noises | Mineral deposits collecting inside the tank. | Flush and inspect the system. |
| Rusty or smelly hot water | A worn anode rod, sediment or corrosion. | Inspect the tank, replace the anode rod or flush when appropriate. |
| Pilot won’t stay lit | Faulty thermocouple, dirty pilot assembly or gas control problems. | Clean, repair or replace the affected component. |
| Breaker keeps tripping | Faulty heating element or electrical wiring problem. | Test the electrical system and repair the fault. |
For more information about specific problems, see our guides:
Water heaters in Saskatoon face a few challenges that can affect their performance and lifespan.
Saskatoon’s treated drinking water contains approximately 170–180 mg/L of hardness minerals, according to city water quality reports.
Over time, these minerals can accumulate inside storage tanks as scale. That buildup can cause popping noises, slower heating and reduced efficiency.
Regular flushing helps manage sediment and protect your water heater’s performance.
During winter, incoming water temperatures are much colder than in summer. Your water heater needs to work harder to bring that water up to the desired temperature.
If heating elements, burners or controls are already wearing out, colder incoming water can make performance problems more noticeable.
Many Saskatoon homes have water heaters installed in basements or mechanical rooms.
A slow leak can damage flooring, drywall and nearby belongings before anyone notices. If you see water collecting around your tank, arrange an inspection promptly.
Regular inspections and maintenance can help identify problems early. Our Saskatoon Water Heater Maintenance Guide explains what proper servicing involves.
Gas water heaters can develop problems with pilot lights, thermocouples, igniters, burners and gas control valves.
Our technicians diagnose the problem, repair or replace faulty components where appropriate, and check relevant connections and venting.
Gas and combustion equipment should always be serviced by qualified professionals.
Electric water heaters commonly experience failed heating elements, faulty thermostats and electrical control problems.
We test the relevant components to identify the actual cause before recommending repairs.
If the problem involves your electrical panel or wiring rather than the water heater itself, Pro Service Mechanical also provides electrical services.
Tankless water heaters can develop error codes, inconsistent temperatures, reduced flow or unexpected shutdowns.
Common causes include mineral buildup, clogged filters, sensors and ignition components.
Regular descaling is particularly important where mineral buildup affects performance.
Learn more about our Tankless Water Heater Services in Saskatoon.
A water heater repair starts with a $168 diagnostic visit, plus tax.
Our technician inspects your equipment, identifies the problem and explains the cost of the recommended repair before starting the work.
Most water heater repairs range from $168 to $800, depending on the problem, the equipment and the parts required.
A thermostat or heating element replacement may be relatively straightforward. Problems involving gas controls, damaged components or extensive corrosion can be more involved.
We’ll explain the available options and provide the repair price so you can decide how to proceed.
Not every broken water heater needs to be replaced. We look at the condition of your equipment, the problem and the cost before recommending the next step.
Repair it if your water heater is under approximately 10 years old, the tank is in good condition and the problem involves a replaceable component.
Replace it if the tank is leaking from corrosion, the equipment is around 10–15 years old and deteriorating, or you’re dealing with repeated breakdowns.
Compare both options if the repair is approaching half the cost of a new water heater. We’ll help you understand the costs so you can decide.
For more information, read How Long Does a Water Heater Last? or visit our Water Heater Installation & Replacement page.
If your water heater has stopped working, there are a few things you can check safely before calling for repairs.
1. Check for leaks. If water is leaking from the tank, close the cold-water supply valve if you can safely access it. Avoid contact with electrical equipment or hot water.
2. Check the breaker. For electric water heaters, check whether the circuit breaker has tripped. If it trips again, leave it off and call a professional.
3. Check the pilot. For gas water heaters, visually check the pilot or status indicator where applicable. Don’t attempt gas component repairs or repeated relighting if the pilot won’t stay lit.
4. Call Pro Service Mechanical. Contact us at (306) 230-2442. Our emergency service is available around the clock.
Important Gas Safety Notice
If you smell natural gas, leave the building immediately and contact SaskEnergy’s emergency line from a safe location. Don’t operate light switches, appliances or anything that could create a spark.
Tell us what’s happening with your water heater. Whether it’s leaking, making unusual noises or producing no hot water, we’ll help arrange the appropriate service.
We offer same-day service when you call before 5 PM. Our emergency service is also available after hours.
Our technician inspects the system, identifies the issue and explains the cost of the recommended repair.
No repair work starts until you’ve approved the price.
Once approved, we complete the necessary repair and test the system to check its operation, connections and relevant safety components.
When your water heater stops working, you want someone who can identify the problem and get your hot water running again.
Here’s what Pro Service Mechanical brings to the job:
Plumbers, gas fitters and electricians under one roof. Water heater problems can involve plumbing, gas and electrical components. Our team provides services across all three trades.
Open 24 hours, every day. Our emergency service is available around the clock for urgent water heater problems.
Pricing before repairs. We diagnose the issue, explain what needs fixing and provide the repair cost before work begins.
A local Saskatoon shop. We’re based on Brodsky Avenue in north Saskatoon, near Circle Drive and the highway connections to Warman and Martensville.
We provide water heater repairs throughout Saskatoon, including Stonebridge, Willowgrove, Evergreen, Brighton, Rosewood, Silverspring, Lakeview, Nutana, Hampton Village, Kensington, Lawson Heights and Silverwood Heights.
Our team also serves surrounding communities, including:
Need something other than a repair? Visit our Water Heater Services in Saskatoon page for installation, replacement, maintenance and tankless service information.
No hot water? Leaking tank? Strange noises?
Call Pro Service Mechanical at (306) 230-2442 any time, or book your water heater repair online.
We’ll find the problem, explain the repair cost and help restore your hot water.
Our licensed professionals have years of experience in HVAC, plumbing, and electrical services, ensuring top-tier workmanship every time.
We’re here when you need us most. Our emergency response team is ready around the clock to handle urgent repairs and restore comfort fast.
We stand behind our work with industry-leading warranties and a commitment to customer satisfaction. Your comfort is our priority.
Common warning signs include no hot water, hot water running out quickly, popping or rumbling noises, rusty water and leaks around the tank. Any of these symptoms is worth checking before the problem gets worse.
It can be. A leak from a connection or valve may be repairable, while a leaking tank can cause serious water damage. If water is actively leaking, shut off the cold-water supply if safe and contact a professional.
Most repairs run between $168 and $800. A diagnostic visit costs $168 plus tax, and we provide the repair price before starting work.
We offer same-day service when you call before 5 PM. After 5 PM, our emergency service remains available throughout the night.
Minerals in Saskatoon’s water can accumulate as scale inside a tank. This buildup can reduce heating efficiency and contribute to noise and equipment wear. Regular flushing helps manage sediment.
If the tank is sound and only one component needs replacing, repair may still make sense. If the tank is leaking, repairs are frequent or the repair cost approaches half the cost of replacement, a new unit may offer better long-term value.
Yes. Pro Service Mechanical provides tankless water heater repairs and maintenance, including descaling, troubleshooting and replacement of faulty components such as sensors and igniters.
You can check basic settings and look for visible problems, but gas connections, electrical wiring, internal components and pressure relief valves should be handled by qualified professionals.