Ensure your electrical system is always in top condition with our expert repair and maintenance services.
Electrical issues can arise unexpectedly, affecting the safety, efficiency, and functionality of your home or business. At Pro Service Mechanical, we provide comprehensive electrical repair and maintenance services to keep your systems running smoothly. Our experienced electricians can handle everything from minor repairs to complex issues, ensuring your electrical systems are safe, efficient, and up to code. Regular maintenance and timely repairs are essential to prolong the lifespan of your electrical systems and avoid costly emergency fixes.
Prompt and professional solutions to electrical issues.
Keep your electrical systems safe and efficient with regular check-ups.
Electrical systems in both residential and commercial properties require regular maintenance and occasional repairs to function safely and efficiently. At Pro Service Mechanical, our expert electricians provide complete electrical repair and maintenance services tailored to your needs. Whether you're dealing with faulty wiring, broken outlets, or outdated panels, we have the expertise to restore your electrical system quickly and safely.
Electrical repairs and maintenance are crucial for preventing hazards and maintaining the integrity of your systems. Whether it’s a minor issue or a major concern, Pro Service Mechanical is here to help with prompt, professional services. Trust our team to keep your electrical systems in optimal condition—contact us today for expert repairs and maintenance!
Our licensed professionals have years of experience in HVAC, plumbing, and electrical services, ensuring top-tier workmanship every time.
We’re here when you need us most. Our emergency response team is ready around the clock to handle urgent repairs and restore comfort fast.
We stand behind our work with industry-leading warranties and a commitment to customer satisfaction. Your comfort is our priority.
Most electrical calls we receive start with a symptom, not a diagnosis. A breaker trips every time someone runs the microwave and the kettle at the same time. An outlet in the kitchen feels warm after a long weekend of cooking. The lights in the living room dim noticeably when the furnace kicks on each morning. These are the everyday warning signs that something in your home's wiring or distribution needs attention, and they are exactly the kinds of problems our residential electrical services are built around.
A tripping breaker is one of the most common calls we handle. Sometimes the fix is straightforward: the circuit is simply carrying more load than it was designed for, and adding a dedicated circuit for a high-draw appliance resolves it entirely. Other times, repeated tripping points to a loose connection, a failing breaker, or a wiring fault that is genuinely unsafe to leave alone. A warm outlet is similar: the warmth itself is the red flag, and it almost always traces back to a loose terminal, a back-stabbed receptacle that has worked its way free, or a device that has been overloaded for too long. In either case, the outlet should be taken out of service until a licensed electrician looks at it.
Flickering lights when the furnace starts are particularly common in Saskatoon homes built before the 1990s, when most houses were wired with far fewer circuits than a modern household needs. When a large motor load starts up, the voltage on a shared circuit dips briefly. Occasional, barely noticeable flicker is usually harmless. But if the dimming is pronounced, affects multiple rooms, or has been getting worse over winter, it can indicate loose panel connections or a conductor that is undersized for the combined load. Saskatchewan winters push heating systems hard, and that repeated start-and-stop cycling stresses connections that might be borderline in warmer months.
Dead circuits and outlets that will not reset are another frequent call. A GFCI that refuses to reset, or a group of outlets in one room that stopped working after a storm, usually has a logical cause: a tripped GFCI upstream that feeds the dead outlets, a failed device, or a loose connection mid-circuit. Our technicians work through these systematically so you know exactly what failed and why, rather than just replacing parts until something works. For outlet and switch installation and repairs, we use screw-terminal connections and CSA-approved devices to avoid the same failure recurring.
An annual electrical safety check is not a regulatory requirement for most Saskatoon homeowners, but it is one of the most cost-effective things you can do to protect your family and your home's insurability. The check gives you a documented picture of your system's condition before a problem becomes an emergency, and it is far less disruptive than a service call at 11 p.m. in January when a circuit fails and the temperature outside is minus thirty.
A thorough inspection covers your main panel first. The technician checks for signs of overheating at the bus bar and breaker connections, confirms that breakers are properly rated for the wire gauge they protect, verifies that the neutral and ground bars are correctly bonded and separated, and reviews the panel directory for accuracy. Mislabelled or unlabelled panels are one of the most common issues we find, and they matter because emergency responders and inspectors need to identify circuits quickly. The electrical panel upgrades page covers what we look for when a panel is nearing the end of its useful life.
The inspection also covers GFCI and AFCI protection. Under the Canadian Electrical Code (CEC), GFCI protection is required at receptacles near sinks, in bathrooms, garages, outdoors, and in unfinished basements. AFCI protection is required on most 15A and 20A branch circuits supplying living areas and bedrooms in homes built or renovated to current code. Older homes often lack both, and insurers are increasingly asking about this during renewals. We test every GFCI on the property, confirm it trips and resets correctly, and flag any locations where protection is missing.
Smoke and carbon monoxide detector wiring is reviewed as part of the check as well. Hard-wired, interconnected alarms are required in new construction and major renovations under Saskatchewan's adopted building code, and they need to be on a circuit that cannot be inadvertently disabled. If your detectors are battery-only, or if they are past their manufacturer-recommended replacement date, we note that clearly. Details on what is involved are on our smoke and carbon monoxide detector installation page. We also inspect your surge protection status, since Saskatoon sees regular lightning events and SaskPower switching transients that can damage electronics and appliances over time. A panel-mounted whole-home surge protection device is one of the lowest-cost, highest-value items we install. A typical safety check runs $150 to $300 for most Saskatoon homes, and any findings are explained in plain language with a clear separation between items that are urgent and items that can be addressed over time.
One of the most common fears homeowners share with us is that they will call about a tripping breaker and leave with a quote for a full panel replacement they did not ask for. We understand that concern. It is why Pro Service Mechanical separates the diagnostic conversation from the upgrade conversation, and why we explain in plain terms what is genuinely necessary for safety versus what would simply be more convenient or future-proof.
The honest answer is that most repairs are exactly that: repairs. A failing breaker, a damaged outlet, a loose connection at the panel, or a single dead circuit in a 2005 Saskatoon home almost never requires a full service upgrade. We fix the specific problem, test the circuit, update the panel directory, and let you know if we noticed anything else worth watching. That is the job, and it usually stays within the $180 to $600 range depending on what is involved.
Where the conversation shifts is when the repair uncovers something structural. If your home was built in the 1960s and still has a 60-amp service, and you want to add an EV charger and finish your basement, a service upgrade is not an upsell: it is a load calculation reality. SaskPower and the CEC both require that new loads be supported by an adequately sized service, and a TSASK electrical permit for new circuits in a home with an undersized panel will trigger that conversation during inspection regardless. In those cases, Pro Service Mechanical walks you through what the upgrade involves, what SaskPower's coordination process looks like, and what realistic timelines and costs are so there are no surprises. Electrical services in Saskatoon covers the full range of what we handle for homeowners across the city.
For homes with aluminium branch wiring from the 1965 to 1975 era, the decision between targeted remediation and broader rewiring depends on the condition of the terminations, the age and type of devices currently installed, and whether any insurance conditions apply. We assess that honestly and give you options with real cost ranges, not a single high-end recommendation. The same applies to knob-and-tube wiring in pre-1960s homes: some situations call for full replacement, others can be addressed circuit by circuit as budget allows, starting with the highest-risk areas. If you have questions before booking, you are welcome to call us at (306) 230-2442 or submit a Request for Service and we will give you a straight answer. For urgent situations that cannot wait, our 24/7 emergency electrician in Saskatoon service is available around the clock, because some electrical problems should not sit overnight. RELIABLE COMFORT starts with a home you can trust, and that includes the wiring behind your walls.
Resetting a breaker once after an obvious overload is fine, but a breaker that trips repeatedly on normal use is telling you something is wrong and should not be ignored. Repeated tripping can point to a persistently overloaded circuit, a failing breaker, a damaged appliance, or a wiring fault, any of which can become a fire hazard if left alone. Saskatoon homes built before the 1990s often have fewer circuits than a modern family needs, so running a space heater, microwave, and kettle on the same circuit is enough to push older wiring past its limit. A diagnostic service call in Saskatoon typically runs $150 to $250, and the repair itself, whether that is redistributing loads, adding a dedicated circuit, or replacing a weak breaker, usually lands between $250 and $700. If the breaker feels hot, there is a burning smell, or it trips the moment you reset it, shut that circuit off and contact our 24/7 emergency electrician in Saskatoon right away.
Yes, stop using it now. A warm outlet is not normal under any circumstances, and it is one of the warning signs the Canadian Electrical Code treats seriously because loose connections and overloaded receptacles are a leading cause of residential electrical fires. The most common culprits in Saskatoon homes are back-stabbed receptacles that have worked loose over years of use, aluminium-to-copper connections made with the wrong hardware, or a single outlet carrying too many high-draw devices. Turn off the circuit at the panel and do not use that outlet until a licensed electrician inspects it, the fix is often a straightforward receptacle replacement during a service call, typically $180 to $300 all in, but leaving it can turn a small repair into a much larger problem. Our team handles outlet and switch installation across Saskatoon, including same-week appointments for non-emergency concerns like this one.
A very brief, barely perceptible flicker when a large motor starts is common and generally harmless, but noticeable dimming or flickering that happens every cycle is worth investigating. In Saskatoon, where furnaces run hard from October through April, that repeated motor start-up stress is excellent at exposing loose connections at the panel, undersized wiring shared between the furnace and lighting circuits, or a neutral conductor that has worked loose at the service entrance. The Canadian Electrical Code requires neutral and ground conductors to be properly torqued and secured precisely because loose neutrals can cause the kind of voltage swings that show up as flickering, and in worse cases can damage appliances or create a shock hazard. A diagnostic visit runs $150 to $250, and tightening connections or separating circuits typically adds another $200 to $600 depending on what is found. If the flickering is new, getting worse, or accompanied by dimming across the whole house, that warrants a prompt call rather than a wait-and-see approach.
Both deserve a proper assessment, but neither automatically means a full rewire this week. Aluminium branch wiring was common in Saskatoon homes built roughly between 1965 and 1975, neighbourhoods like Fairhaven, early Confederation Park, and parts of East College Park, and the concern is that aluminium expands and contracts more than copper, which loosens terminations over time and creates heat at devices not rated for it; the Canadian Electrical Code requires CO/ALR-rated devices or approved connectors like AlumiConn pigtails wherever aluminium conductors terminate. Knob-and-tube wiring, found mainly in pre-1960s homes in areas like Caswell Hill and Riversdale, has no equipment ground and was never designed to be buried under modern attic insulation, which is why Saskatchewan insurers often require remediation before they will bind or renew a policy. A targeted inspection to assess the scope of the problem usually costs $200 to $400, remediation at devices runs several hundred dollars, and a full or partial rewire can range from $6,000 to $20,000 or more depending on house size and access. Our residential electrical services include aluminium wiring assessments and remediation, and we will give you an honest picture of what is urgent versus what can be phased in.
Simple like-for-like device replacements, swapping a failed outlet for an identical one, for example, generally do not require a permit, but most meaningful electrical work does, including new circuits, panel changes, service upgrades, EV charger installations, and basement suite wiring. In Saskatchewan, electrical permits and inspections are administered by TSASK (Technical Safety Authority of Saskatchewan) and by SaskPower under The Electrical Inspection Act; the City of Saskatoon handles building and development permits separately, but the electrical inspection authority is TSASK or SaskPower depending on the scope of work. When we pull a permit for your job, we handle the paperwork, book the inspections, and coordinate with SaskPower for any required disconnect or reconnect, you do not need to navigate that process yourself. Permit fees for residential work in Saskatchewan typically run $80 to $400 depending on scope, and we include that cost in our written quote so there are no surprises. Skipping a permit where one is required can void your home insurance coverage in the event of a claim, so we always confirm requirements before starting any job.
A proper annual electrical safety check for a Saskatoon home should include a visual inspection of the main panel for signs of overheating, corrosion, loose connections, and mislabelled breakers; testing of all accessible GFCI receptacles and breakers; verification that smoke and carbon monoxide alarms are powered and interconnected correctly; and a review of any visible wiring in the basement, utility room, and attic for damage or code concerns. In Saskatoon's climate, the pre-winter window, September through October, is a practical time to do this check before heating loads ramp up and any weak points in the system get stressed repeatedly. The cost for a typical Saskatoon home runs $150 to $350 for a standard inspection, rising to $300 to $500 if a detailed written report or thermal imaging of the panel is included. It is genuinely worth it for homes older than about 30 years, for any house that has had multiple owners or DIY work, and for households running high loads like EV chargers, hot tubs, or electric heating. You can request a safety check through our Request for Service page, and we will separate any urgent findings from items that can be addressed on your schedule.
Yes, our 24/7 emergency electrician in Saskatoon is available around the clock for situations that cannot wait, including burning smells, sparking panels, loss of power to heating equipment in winter, or water infiltration into electrical gear. In Saskatoon's climate, a circuit failure that cuts heat in January is not a problem you defer until Monday morning, and we take that seriously. After-hours and weekend service calls typically carry a premium of $100 to $250 over the standard call-out fee, with after-hours hourly rates often in the $150 to $200 per hour range; we confirm pricing before dispatching so you know what to expect. For non-urgent work, a tripping breaker, a flickering light, a dead outlet, we aim for next-business-day or within a few days, and we give you a clear arrival window rather than a half-day wait. We will always tell you honestly over the phone whether your situation warrants an emergency call or whether it is safe to schedule regular service hours.
We stand behind our workmanship with a written warranty, and we will tell you the exact terms before we start any job, not after. Our standard workmanship warranty covers defects in how the work was performed, meaning if something we repaired or installed fails because of our installation, we come back and fix it at no additional charge within the warranty period. Parts and devices we supply also carry the manufacturer's warranty, which for quality CSA-approved receptacles, breakers, and fixtures is typically one to several years depending on the product. We provide an itemised invoice for every job that documents what was repaired, what was installed, and the applicable warranty terms, so you have a clear record if you ever need to refer back to it. If you are comparing quotes from multiple electricians, ask each one to put their warranty terms in writing, a contractor who is confident in their work will have no hesitation doing so, and it is one of the clearest ways to tell good work from rushed work.
